consiglio per hand-rest regolabile
Moderatore: rob
-
- FTI Umbria
- Messaggi: 105
- Iscritto il: lunedì 16 febbraio 2015, 22:28
- Località: riccione
- Contatta:
consiglio per hand-rest regolabile
ciao a tutti, avrei bisogno di un consiglio: vorrei acquistare un hand rest regolabile per il mio fwb 700 con calcio gimb, ed avrei bisogno delle misure esatte della slitta se qualcuno le conosce,
o se sapete consigliarmi un adattatore. l'hand rest che vorrei acquistare va su slitte steyr/walther.
il costruttore (aron jalakas) mi ha dato tre opzioni:
2. You have options:
a) buy a t-slot rail that fits the Steyr/Walther T-slot dimensions.
b) buy an extra piece, I can get a price quote but I think it will be ca 65€ here in Estonia. This also requires exact dimensions of your dovetail attachment rail.
there is also the third option
c) I see a brass nut inside your dovetail rail. IF you can put two brass nuts inside the rail, like the one you have, then you can attach the hamster two those nuts without a problem. The hamster riser uses M4 screws.
This would be the cheapest options as you only have to add the nuts (or something equivalent to screw the M4 hex screws into).
In order to keep the attachment M4 screws straight inline with the barrel you need to know the width of the central channel (probably 5-6 mm) and then use some short pipes to center the M4 screws in the 5-6 mm channel.
ogni consiglio che potete darmi sara' prezioso, grazie 1000
davide
o se sapete consigliarmi un adattatore. l'hand rest che vorrei acquistare va su slitte steyr/walther.
il costruttore (aron jalakas) mi ha dato tre opzioni:
2. You have options:
a) buy a t-slot rail that fits the Steyr/Walther T-slot dimensions.
b) buy an extra piece, I can get a price quote but I think it will be ca 65€ here in Estonia. This also requires exact dimensions of your dovetail attachment rail.
there is also the third option
c) I see a brass nut inside your dovetail rail. IF you can put two brass nuts inside the rail, like the one you have, then you can attach the hamster two those nuts without a problem. The hamster riser uses M4 screws.
This would be the cheapest options as you only have to add the nuts (or something equivalent to screw the M4 hex screws into).
In order to keep the attachment M4 screws straight inline with the barrel you need to know the width of the central channel (probably 5-6 mm) and then use some short pipes to center the M4 screws in the 5-6 mm channel.
ogni consiglio che potete darmi sara' prezioso, grazie 1000
davide
- Andre K98
- FTI Umbria
- Messaggi: 2295
- Iscritto il: lunedì 30 novembre 2009, 23:05
- Località: Città di Castello (PG)
Re: consiglio per hand-rest regolabile
Invia un PM all'utente T.S
Sicuramente può darti due dritte.
Sicuramente può darti due dritte.
Sako TRG 22 .308-Sightron SIII 10-50x60 LRIRMOA
Sabatti Tactical Evo 6,5 Creedmoor-Sightron SIII 10-50x60 LRIRMOA
Mauser Karabiner98K 7,92x57
1917 Carl Gustafs 6,5x55
46°(20°score) Field Target World Championships,Italy 2011
"Potrei ammazzare le pulci di un cane da 500 iarde Tannen, ed è puntato dritto alla tua testa!"
南斗白鷺拳
ID Skype: manigoldo83
Sabatti Tactical Evo 6,5 Creedmoor-Sightron SIII 10-50x60 LRIRMOA
Mauser Karabiner98K 7,92x57
1917 Carl Gustafs 6,5x55
46°(20°score) Field Target World Championships,Italy 2011
"Potrei ammazzare le pulci di un cane da 500 iarde Tannen, ed è puntato dritto alla tua testa!"
南斗白鷺拳
ID Skype: manigoldo83
- rob
- Presidente FTI
- Messaggi: 1276
- Iscritto il: martedì 2 ottobre 2012, 17:28
- Località: Roma
Re: consiglio per hand-rest regolabile
Considerato il costo accessibile ( 110 euro ) del meccanismo, ti consiglierei di comprare solo quello, per poi adattarlo al rest che vuoi, scegliendo tu se inserirlo nella scina o fissarlo con le viti M4.
a presto,
rob
a presto,
rob
-
- FTI Umbria
- Messaggi: 105
- Iscritto il: lunedì 16 febbraio 2015, 22:28
- Località: riccione
- Contatta:
Re: consiglio per hand-rest regolabile
grazie ragazzi, nella scina del calcio non posso fissarlo perche'la scina ginb e' diversa da quella steyr/walther ed ha una sola boccola, e non vedo modo di aggiungere una boccola per ora...
se trovo le misure della scina ginb mi faccio fare l'adattatore dirttamente da aron, proverò a contattare ts grazie ancora !
se trovo le misure della scina ginb mi faccio fare l'adattatore dirttamente da aron, proverò a contattare ts grazie ancora !
- rob
- Presidente FTI
- Messaggi: 1276
- Iscritto il: martedì 2 ottobre 2012, 17:28
- Località: Roma
Re: consiglio per hand-rest regolabile
Mi è arrivato oggi il rest di Aron... una figata!
Si stringe con poca pressione e rimane saldamente bloccato. Ottimo progetto!
a presto,
rob
Si stringe con poca pressione e rimane saldamente bloccato. Ottimo progetto!
a presto,
rob
Non hai i permessi necessari per visualizzare i file allegati in questo messaggio.
- Lescarroz
- V.I.P.
- Messaggi: 230
- Iscritto il: sabato 23 luglio 2011, 23:21
- Località: Paese del Monte Bianco, Francia
Re: consiglio per hand-rest regolabile
Ho lo stessu da una settimana.
E veramente perfetto, leggero e srtringe molto bene senza sforzo.
E veramente perfetto, leggero e srtringe molto bene senza sforzo.
Renzo
-
- FT Calabria
- Messaggi: 2028
- Iscritto il: martedì 20 settembre 2011, 21:22
- Località: Cosenza
Re: consiglio per hand-rest regolabile
Bellissimo
ANTONIO
Steyr lg 100 + Leapers accushot 8-32x56
vae victis
http://fieldtarget-calabria.it/forum/index.php
Steyr lg 100 + Leapers accushot 8-32x56
vae victis
http://fieldtarget-calabria.it/forum/index.php
- biglegs
- FT Veneto
- Messaggi: 551
- Iscritto il: domenica 16 febbraio 2014, 21:00
- Località: Mestre (VE)
Re: consiglio per hand-rest regolabile
rob ha scritto:Mi è arrivato oggi il rest di Aron... una figata!
Si stringe con poca pressione e rimane saldamente bloccato. Ottimo progetto!
a presto,
rob
Ieri ho scritto in facebook ad Aron pensi si sufficiente o hai qualche altro contatto?
Grazie mille "bello davvero"
Michele
4° F.T.I. Campionato Italiano 2015 - Cat. PCP 7,5J
8° F.T.I. Campionato Italiano 2014 - Cat. PCP 7,5J
4° F.T.I. Campionato Italiano 2015 - Cat. PCP 7,5J
8° F.T.I. Campionato Italiano 2014 - Cat. PCP 7,5J
- lagunamiles
- FT Veneto
- Messaggi: 251
- Iscritto il: giovedì 29 novembre 2012, 22:05
- Località: Venezia Isola
Re: consiglio per hand-rest regolabile
Michele lo prenderei anche io per il mio hw100...dividiamo le spese di spedizione ?
Lagunamiles
Lagunamiles
>> HW100 T QF - TUMB 4.5 7.5J Ottica Hawke SIDEWINDER 30 8-32x56 SR PRO IR <<
- biglegs
- FT Veneto
- Messaggi: 551
- Iscritto il: domenica 16 febbraio 2014, 21:00
- Località: Mestre (VE)
Re: consiglio per hand-rest regolabile
Certo no problem!
Confido in una risposta di Rob e poi mi muovo
Nel frattempo spero che Aron mi contatti
Confido in una risposta di Rob e poi mi muovo
Nel frattempo spero che Aron mi contatti
Michele
4° F.T.I. Campionato Italiano 2015 - Cat. PCP 7,5J
8° F.T.I. Campionato Italiano 2014 - Cat. PCP 7,5J
4° F.T.I. Campionato Italiano 2015 - Cat. PCP 7,5J
8° F.T.I. Campionato Italiano 2014 - Cat. PCP 7,5J
-
- FTI Emilia Romagna
- Messaggi: 85
- Iscritto il: sabato 27 settembre 2014, 18:39
- Località: Ferrara
Re: consiglio per hand-rest regolabile
Ciao ragazzi che dite se mi unisco a voi nel prenderne uno e dividessimo le spese di spedizione in 3? Se vi va bene questa sera mando un mp a Michele per sapere se il tutto è fattibile e per eventualmente spiegare come dare i soldi (o a una gara o un bonifico)
Ciao Alessandro.
Ciao Alessandro.
- rob
- Presidente FTI
- Messaggi: 1276
- Iscritto il: martedì 2 ottobre 2012, 17:28
- Località: Roma
Re: consiglio per hand-rest regolabile
Ho appena avuto il consenso di Aron Jalakas per pubblicare l'indirizzo email (scrivetegli in inglese) : the.ft2ft@gmail.com
La cattiva notizia è che il prossimo lotto di rest regolabili sarà pronto all'inizio di agosto, dopo le ( loro ) vacanze estive.
a presto,
rob
La cattiva notizia è che il prossimo lotto di rest regolabili sarà pronto all'inizio di agosto, dopo le ( loro ) vacanze estive.
a presto,
rob
- biglegs
- FT Veneto
- Messaggi: 551
- Iscritto il: domenica 16 febbraio 2014, 21:00
- Località: Mestre (VE)
Re: consiglio per hand-rest regolabile
urca vacc!!!!rob ha scritto:Ho appena avuto il consenso di Aron Jalakas per pubblicare l'indirizzo email (scrivetegli in inglese) : the.ft2ft@gmail.com
La cattiva notizia è che il prossimo lotto di rest regolabili sarà pronto all'inizio di agosto, dopo le ( loro ) vacanze estive.
a presto,
rob
vabbè domani gli scrivo (tre rest con scina da undici)Biglegs-Paolo-Benny
Grazie Rob
Michele
4° F.T.I. Campionato Italiano 2015 - Cat. PCP 7,5J
8° F.T.I. Campionato Italiano 2014 - Cat. PCP 7,5J
4° F.T.I. Campionato Italiano 2015 - Cat. PCP 7,5J
8° F.T.I. Campionato Italiano 2014 - Cat. PCP 7,5J
-
- FT Calabria
- Messaggi: 2028
- Iscritto il: martedì 20 settembre 2011, 21:22
- Località: Cosenza
Re: consiglio per hand-rest regolabile
Roberto hai avuto modo di provarlo come si deve? Come ti sembra?
ANTONIO
Steyr lg 100 + Leapers accushot 8-32x56
vae victis
http://fieldtarget-calabria.it/forum/index.php
Steyr lg 100 + Leapers accushot 8-32x56
vae victis
http://fieldtarget-calabria.it/forum/index.php
- rob
- Presidente FTI
- Messaggi: 1276
- Iscritto il: martedì 2 ottobre 2012, 17:28
- Località: Roma
Re: consiglio per hand-rest regolabile
Molto valido: si regola con facilità , i due perni non necessitano di eccessiva forza per rimanere ben saldi.
Anche gli amici che lo hanno visto in Campania lo hanno trovato ottimo.
Ci vorrà qualche settimana per una valutazione più dettagliata.
a presto,
rob
Anche gli amici che lo hanno visto in Campania lo hanno trovato ottimo.
Ci vorrà qualche settimana per una valutazione più dettagliata.
a presto,
rob